İçeriğe Atla 
Flexible PCB & Rigid-Flex PCB Manufacturing
Source flexible PCB, FPC and rigid-flex PCB from one manufacturing partner for compact products, lightweight modules and assemblies with limited installation space. YC PCB supports custom outlines, bend zones, stiffeners, coverlay openings, electrical testing and optional component assembly from prototype through repeat production.
Built Around Your Final Assembly
Bend areas, rigid support zones, connector positions, stiffeners and assembly requirements are confirmed before the production process is released.
Flexible PCB and Rigid-Flex Structures for Different Products
Select the structure according to routing density, static or dynamic bending, component mounting areas, connector design and the way the board will be installed in your finished product.
Flexible PCB / FPC Board
Flexible interconnects for compact products that require low weight, custom outlines and controlled bending during installation or use.
- Double-layer construction available by file requirement
- Custom outline, connector, gold finger and stiffener areas
- Suitable for cameras, sensors, wearables and smart devices
4-Layer Flex PCB
A multilayer flexible circuit for products that need more signal and power routing within a thin, bendable interconnect.
- Higher routing density than standard double-layer FPC
- Stack-up and bend-zone planning for compact electronics
- Suitable for designs with complex signal interconnection
Sert-Hafif PCB
Rigid and flexible sections are integrated into one board to reduce separate cables and connectors while simplifying compact product assembly.
- Rigid component areas with integrated flexible interconnects
- Custom transition zones and mechanical layouts
- Suitable for compact modules requiring fewer connections
Choose the Structure That Fits Your Assembly
Flexible PCB replaces bulky wiring with a thin circuit that can fold into narrow spaces. Rigid-flex PCB adds stable rigid areas for components while keeping integrated flexible sections between mounting zones.
- Choose flexible PCB when the product needs lightweight routing, a custom outline or installation inside a narrow space.
- Choose rigid-flex PCB when components need rigid mounting areas and the product also requires flexible interconnection between them.
- Provide the bend radius, routing direction, connector position, stiffener and coverlay requirements so the manufacturing structure can be quoted correctly.
Structure Matched to Installation
PI film, copper routing, coverlay openings, stiffener zones and connector areas are coordinated with the way the circuit will be installed and handled.
Critical Flex PCB Details to Confirm
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Inspection Before Shipment
Electrical testing, AOI, visual inspection and dimensional checks are selected according to the circuit structure and acceptance requirements.
Flexible PCB vs. Rigid-Flex PCB
Compare product structure, assembly method and required quotation files before deciding between a standalone flexible circuit and an integrated rigid-flex board.
| Route | Best For | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Quotation Files |
|---|---|---|---|
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Camera modules, sensors, wearables, compact electronics, smart devices. | Bend radius, custom outline, connector area, stiffener, coverlay opening. | Gerber, drill file, board outline, bend notes, panel request. |
| 4-Layer Flex PCB | Complex electronics and high-density flexible circuit board projects. | Layer stack-up, impedance notes if any, copper routing density, stiffener area. | Gerber, stack-up, drawing, controlled features and testing requirement. |
| Sert-Hafif PCB | Compact control modules, communication devices, sensors and high-reliability assemblies. | Rigid area thickness, flex transition zone, bend location, component keepout, assembly protection. | Gerber, stack-up, 3D/mechanical drawing, BOM if PCBA is needed. |
Flexible PCB Manufacturing Capabilities
Flexible circuit manufacturing capabilities covering product structures, materials, dimensions, via technologies, surface finishes, inspection and electrical testing.
Flexible PCB (FPC) Manufacturing Capabilities
Manufacturing parameters are evaluated according to the approved design, material structure and application requirements.
| Item | Capability |
|---|---|
| Product Type | Single-sided FPC, Double-sided FPC, Multilayer FPC, Rigid-Flex PCB |
| Katman Sayısı | 1–4 Layers (standard) |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Polyimide (PI), PET available for specific applications |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 1/3 oz – 2 oz |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 0.05 mm – 0.30 mm |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 0.10 mm / 0.10 mm (4 mil / 4 mil) |
| Minimum Mechanical Drill Size | 0.20 mm |
| Minimum Laser Via Size | 0.075 mm, depending on design requirements |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Through Via, Blind Via available according to design |
| Coverlay Material | Polyimide Coverlay |
| Coverlay Thickness | 0.025 mm – 0.075 mm |
| Stiffener Material | FR4, PI, Stainless Steel, Aluminum |
| Surface Finish | ENIG, OSP, Immersion Tin, Hard Gold |
| Lehim Maskesi | Flexible Solder Mask / Coverlay Process |
| Silkscreen | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| İmpedans Kontrolü | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Elektriksel Test | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Inspection | AOI Inspection, Visual Inspection, Microsection Analysis |
| Quality Standard | IPC-A-600 / IPC-6013 |
| Sertifika | ISO 9001, UL available according to factory certification |
From Approved Files to Tested Flexible Circuits
Each project is reviewed according to its layer structure, bending requirements, materials, dimensions and end-use conditions before production begins.
File and Structure Confirmation
Gerber data, drill files, outline, bend direction, layer count, materials and stiffener requirements are confirmed before production.
Material and Circuit Formation
Flexible base materials are prepared, circuits are imaged and etched, and coverlay openings are processed according to the approved design.
Lamination and Mechanical Processing
Flex and rigid sections are bonded where required, followed by outline cutting, connector processing, stiffener installation and mounting-feature processing.
Testing, Inspection and Packing
Electrical testing, AOI, dimensional inspection, visual checks and protective packing are completed before shipment.
Typical FPC Applications
Flexible PCB solutions are widely used in LED lighting, consumer electronics, automotive systems, industrial equipment, sensors and compact medical electronic devices.
LED Aydınlatma
Flexible LED PCB and LED light strips for compact, curved and space-limited lighting designs.
Tüketici Elektroniği
Flexible circuit solutions for wearable devices, smart products and compact consumer electronic assemblies.
Otomotiv Elektroniği
Flexible circuits for vehicle lighting systems, electronic control modules and compact automotive assemblies.
Industrial Equipment
Flexible connection circuits for industrial equipment, automation devices and compact control systems.
Medical Electronics
Compact flexible circuit solutions for portable, lightweight and space-limited medical electronic devices.
Sensors
Flexible interconnects for sensors, connector boards and narrow installation zones.
Prepare These Files for an Accurate Flex PCB Quote
A complete package allows YC PCB to confirm the bend structure, rigid-flex transition, coverlay openings, stiffeners, connector areas, testing scope and optional assembly requirements.
- Gerber files and Excellon drill file
- Stack-up notes for FPC or rigid-flex PCB
- Board outline drawing with bend direction and bend radius
- Stiffener, coverlay opening, connector and gold finger notes
- BOM and placement file if flex PCB assembly is needed
Send Your Flexible PCB Requirements
Submit your contact details and project requirements through our quick inquiry form. For Gerber files, drill data, stack-up, bend notes, BOM, drawings or other attachments, email them directly to our engineering team.
E-posta: sales@ycelectronic.com
Quality Checks Before Shipment
Flexible circuits require control at bend zones, transition areas and connectors because these locations directly affect assembly fit and service life.
Elektriksel Test
Open- and short-circuit testing confirms that the finished flexible circuit matches the approved netlist before shipment.
AOI and Visual Inspection
Copper routing, coverlay openings, pads, surface finish and visible workmanship are checked against the production data.
Dimensions and Bend-Zone Check
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Choose rigid-flex PCB when your product needs rigid component mounting areas and flexible interconnect sections in a small space, especially when cable connections may reduce reliability or increase assembly complexity.
Can you provide flexible PCB assembly?
Yes. Flexible PCB assembly can include SMD, through-hole, BGA or mixed assembly according to the product design. Send the BOM, placement file and assembly drawing with your quotation package.
Request Pricing for Flexible PCB or Rigid-Flex PCB
Send your Gerber data, stack-up, bend notes and quantity. YC PCB will confirm the material structure, bend areas, stiffeners, coverlay, testing scope and optional assembly requirements for your quotation.
From Bare FPC to Tested Assembly
Flexible PCB and rigid-flex manufacturing, electrical testing, inspection and optional component assembly from one supplier.
Send Your Flexible PCB Requirements
Tell us what you need. For Gerber files, drill data, stack-up, bend notes, BOM, drawings or other attachments, email them directly to sales@ycelectronic.com after submitting this form.
Turkish 
English 
Japanese 
French 
German 
Spanish 
Italian 
Portuguese 
Russian 
Dutch 