Most "how to choose a PCB manufacturer" articles list the same criteria: capability, quality, price, lead time, support. All true, all unfalsifiable. The question that separates a real evaluation from a checklist is: what evidence would convince me, and would this supplier produce it?
This article is a buyer audit framework. For each criterion it gives the evidence to ask for, what a weak answer looks like, and the red flags that predict problems after you have paid. YC PCB has been on both sides of this conversation for 20+ years and ships to 20+ countries.
The Framework
Eight criteria, and why these eight
| Criterion | What it decides | Evidence to request |
|---|---|---|
| Capability boundary | Whether your board is routine or at the edge | Written capability matrix with limits and refusals |
| Engineering process | Whether errors are caught before tooling | DFM report format, reviewer role, sample report |
| Quality system | Whether process control exists | Certification scope, not just the certificate |
| Test strategy | Whether defects reach you | Test method per board type, coverage, reports |
| Traceability | Whether a failure can be investigated | Lot, panel, date code, material traceability |
| Delivery policy | Whether dates mean anything | Conditions attached to the date |
| Commercial terms | Whether the relationship is workable | MOQ, payment, rework, change notification |
| Communication | Whether problems surface early | Named engineer, response commitment |
1. Capability: Ask for the Boundary, Not the Ceiling
Why minimums beat maximums
Every supplier advertises a maximum. Maximums are marketing; boundaries are engineering.
Ask:
- What is your minimum annular ring, minimum via, minimum trace/space at 1 oz and at 2 oz?
- What is your maximum aspect ratio, and what board thickness does that assume?
- Which constructions do you decline, and why?
- What is your largest panel, and what is your typical panel utilisation on a mixed order?
Weak answer: "We can do anything." No factory can, and a supplier who claims it either does not know their process or is not planning to build your board themselves.
Red flag: a capability page with maximums but no minimums. Minimums are where boards fail.
2. Engineering Process: Who Actually Reviews the File
DFM review is only as good as the person doing it.
Ask:
- Who reviews incoming files, and what is their role?
- Can I see a sample DFM report?
- Do you flag issues before quoting, or after payment?
- Do you return the stack-up you quoted on?
Weak answer: "Our engineers check everything." Ask for the report. A DFM report that says "files OK" is not a report.
Red flag: DFM review offered only after the order is placed. At that point every finding is a change order.
3. Quality System: Read the Scope
ISO 9001 and UL are meaningful — and frequently cited without their scope.
Ask:
- Which legal entity holds the certificate, and does it match the entity I am contracting with?
- What is the scope statement, and does it cover the processes my board needs?
- Is UL certification for the laminate, the finished board, or both?
- What is the certificate number and expiry?
Weak answer: a logo on the website with no number.
Red flag: certificate held by a trading company whose factory is unnamed. Not necessarily disqualifying, but you should know who builds the board.
4. Test Strategy: Coverage, Not the Word "Tested"
Ask:
- Is electrical test 100% or sampled?
- Is AOI on inner layers, outer layers, or both?
- For assembly: is X-Ray standard or optional, and at what package pitch?
- Do you provide a test report with the shipment?
- Can you do impedance coupons on controlled-impedance orders?
Weak answer: "We test every board." Everyone says this. Ask what the test covers.
Red flag: no test report available. If the data does not exist, the test is a claim.
5. Traceability: Can a Failure Be Investigated?
For industrial, automotive and medical programmes, traceability is not a nice-to-have.
Ask:
- Can you trace a shipped board back to panel, lot, date code and material batch?
- Do you keep records of lamination parameters and plating thickness per lot?
- How long are records retained?
Weak answer: "We can check with the production team." That means records are informal.
Red flag: no date code on the board or the packaging. Without it, a field failure cannot be tied to a build.
6. Delivery Policy: What the Date Depends On
Ask:
- Is the quoted date conditional, and on what?
- What happens when material is not in stock?
- How do you notify a delay, and when?
- What is your on-time record, and how is it measured?
Weak answer: a date with no conditions. Every date depends on something — material, layer count, finish, test scope, queue.
Red flag: a very short lead time on a complex board. Either the date is aspirational, or the process is being compressed somewhere.
7. Commercial Terms That Prevent Disputes
The five clauses worth arguing for
- MOQ / MOV — and whether special materials carry their own minimum
- Payment terms — and what happens on a partial shipment
- Rework policy — who pays, at what stage, and who decides scrap versus rework
- Change notification — will you be told if the laminate, finish or process changes?
- Excess material — returned, scrapped, or held
- IP protection — is an NDA available, and who signs
A supplier who resists a change-notification clause is telling you something about how they handle repeat orders.
8. Communication: The Real Differentiator
Technical capability converges across competent suppliers. What separates them is whether problems reach you early.
Ask:
- Who is my contact, and are they an engineer or a salesperson?
- What is the response commitment for a technical question?
- What happens if my file has an issue at 5 pm on a Friday?
Red flag: a single generic inbox with no named contact. On a complex board, the difference between a caught error and a scrapped panel is often one engineer who noticed.
The Anti-Recommendation
Three situations where the biggest or cheapest supplier is the wrong choice:
The largest fabs are optimised for volume, not for you. A supplier running millions of square metres optimises for a narrow process window and few changeovers. If your board is a 500-piece industrial order with a non-standard stack-up, you are a scheduling inconvenience.
The cheapest quote usually has the narrowest scope. Compare the test scope, the material grade, the panel utilisation and the coupon requirement. The lowest number is frequently the least work.
The fastest quote is often the least reviewed. A quote returned in ten minutes did not include a DFM review. Speed at quotation often means assumptions at production.
The Supplier Scorecard
Criteria alone do not decide anything. What decides is scoring each answer against a definition, so two suppliers can be compared without arguing about impressions.
Score each row 0–3, multiply by the weight, then total. The definitions matter more than the weights — change them to suit your programme, but write them down before you talk to any supplier.
| Criterion | Weight | 3 — strong | 2 — workable | 1 — weak | 0 — unusable |
|---|---|---|---|---|---|
| Capability boundary | ×5 | Written matrix with minimums and named refusals | Minimums available on request | Only maximums published | "We can do anything" |
| Engineering review | ×5 | Named engineer, sample DFM report, review before quote | Review exists, format unclear | Review only after order | No review offered |
| Quality system | ×3 | Certificate scope matches the entity you contract with | Certificate exists, scope vague | Logo only | Cannot state entity |
| Test strategy | ×4 | 100% electrical test, AOI scope defined, report shipped | Test performed, report on request | "We test everything" | No test record |
| Traceability | ×4 | Panel, lot, date code and material batch all traceable | Date code only | Records informal | No date code |
| Delivery honesty | ×3 | Date stated with its conditions | Date given, conditions vague | Date always "urgent" | Date changes without notice |
| Commercial terms | ×3 | Change notification and rework policy in writing | Standard terms, negotiable | Resists written terms | Refuses change notice |
| Communication | ×3 | Named engineer, stated response commitment | Named sales contact | Generic inbox | No response to technical questions |
Weighted total runs to 90. Practical reading:
- Above ~75 — a supplier you can grow with. Move to a pilot order.
- 55–75 — usable, with specific gaps to manage in the contract. Write those gaps into the PO.
- 40–55 — transactional only. Fine for a one-off simple board, wrong for a repeat programme.
- Below 40 — the price is the only thing on offer. Expect the difference to be paid later in yield, delays or rework.
Two rules for using it. Score what you were shown, not what you were told — a claim with no document scores at most 2. And weight test strategy and traceability heavily if your product has field-failure exposure, because those are the two rows that determine whether a problem can be found and attributed later.
Audit Checklist
- Request the capability matrix with minimums and refusals.
- Ask for a sample DFM report and the reviewer's role.
- Verify certificate scope and entity against your contract.
- Confirm test method and coverage per board type, with reports.
- Confirm traceability fields and record retention.
- Ask what the quoted lead time depends on.
- Agree change notification and rework policy in writing.
- Get a named engineer and a response commitment.
- Run a pilot order before committing volume.
- Compare at least three quotes on scope, not on total.
FAQ
How many PCB manufacturers should I evaluate?
Three is usually enough to benchmark, and more than five becomes a full-time job. What matters is that all three are scored on the same written definitions, and that at least one is a supplier sized for your order rather than the largest name you can find.
Is a cheaper PCB manufacturer always riskier?
No, but the risk moves somewhere. A lower price usually means a narrower scope: sampled instead of 100% test, a commodity laminate instead of the grade you specified, a default panel array, or no DFM review before tooling. Price is only meaningful next to the scope it buys.
Can I audit a factory without visiting it?
Largely yes. Ask for the capability matrix with minimums, a sample DFM report, certificate scope and entity, a test report from a comparable order, and the traceability fields recorded per lot. Those five documents reveal more than a guided tour, because they are the records the factory actually produces when nobody is watching.
What is the single strongest signal of a good supplier?
Willingness to decline work. A supplier that tells you which constructions it will not build, and why, is describing a real process window. A supplier that accepts everything has either no limits or no intention of building your board itself.
Why YC PCB
- 20+ years of PCB and PCBA manufacturing, exporting to 20+ countries
- Capability across FR4, aluminum and copper metal-core, multilayer (6–32 layer route), HDI, FPC and rigid-flex
- DFM/DFA engineering review before production, with NDA available for customer IP
- AOI and electrical test on bare boards; X-Ray, ICT and FCT for assembly projects
- ISO 9001 and UL certification; RoHS compliance documentation on request
- Named project engineer from quotation through shipment
- No MOQ / No MOV on standard boards, quoted per project for special materials
Get a Quote — Send your Gerber, stack-up, quantity and target date, and tell us what you need to verify. Our engineers reply with DFM notes, capability confirmation and pricing within one working day.
